Stolz Closures for Metal and Plastic Containers

Stolz Closures for Metal Containers

Specially designed for tin-plate containers in a broad range of sizes (from 250ml/0.066 gal to 19 liter/5 gal), these Stolz closures offer a highly effective plastic-to-metal seal. Models are available to fit openings of 24, 32, 42, 57 and 100mm.

Standard features include:

• Easy application—no need for soldering/presses into standard opening.
• Child-resistant, senior-friendly design.
• A built-in tamper-evident tear-out diaphragm.
• An interior design that allows for a complete drain of the container when pouring.

Note: Standard colors are red, white and black.

Closures for 24mm Openings

B24/2 REL CR 2N CR1
Description

• For REL opening 
• For small containers with a 24mm opening. 
• Child-resistant double push tab.

Cap - HDPE

Body - LDPE

B24/2 AF A
Description

• For DIN opening.
• Screw cap closure for small metal containers with 24mm DIN opening

B24/2 CR 2N CR1
Description

• For DIN opening 
• Model with a child-resistant feature

Closures for 1” Aerosol Openings

B32/2 DD A
Description

• Screw cap closure for metal containers with a 1” opening (Aerosol closure)

Closures for 32mm Openings

B32 REL CR CR
Description

• For REL opening
• For intermediate size containers with a 32mm opening
• Child-resistant single push tab

Cap - HDPE

Body - LDPE

B32 REl A
Description

• Same as B32 REL CR CRclosure without child-resistant feature

HZ 32 CRV REL
Description

• For REL opening 
• For intermediate size containers with a 32mm opening 
• Child-resistant single push tab
• Additional venting feature

B32 FA A
Description

• Screw cap closure for metal containers with a 32mm DIN opening

B32 CR CR
Description

• For DIN opening 
• Model with a child-resistant feature

B303 REL A
Description

• For REL opening
• All plastic directional pour spout closure with extended pouring feature, built in tamper evident.

Closures for 42mm Openings

B42/1 REL CR CR
Description

• For REL opening 
• For intermediate size containers with a 42mm opening.
• Large 1-3/8" (35mm) pouring orifice ideal for more viscous contents.
• Child-resistant single push tab

Cap -HDPE

Body - LDPE

B42/1 CR CR
Description

• For DIN opening 
• Model with a child-resistant feature

B42/1 AFZ A
Description

• For DIN opening 
• Model without a child-resistant feature

B42 HP/1
Description

• For DIN opening 
• High neck screw cap with side lugs to facilitate opening.
• Ideal for adhesives and viscous products. 
• Internal thread for brush attachment.
• Standard brush lengths: 100mm and 140mm.

B403 REL Z
Description

• For intermediate size containers with a 42mm REL opening.
• Large 1-3/8" (35mm) pouring orifice ideal for more viscous contents.

Cap - HDPE

Body - LDPE

B403 REL CR CR
Description

• For intermediate size containers with a 42mm REL opening.
• Large 1-3/8" (35mm) pouring orifice ideal for more viscous contents. 
• Child-resistant double push tab

Cap - HDPE

Body - LDPE

B402 AFZ CR CR
Description

• Model with a child-resistant feature.
• Low profile closure for containers with a 42mm DIN opening. 
• Base channels for improved drainage, cylindrical base for ease of handling.

B402/2 AFZ C
Description

• Model without a child-resistant feature. 
• Low profile closure for containers with a 42mm DIN opening. 
• Base channels for improved drainage, cylindrical base for ease of handling.

B402/2 C
Description

• All plastic directional pour spout closure for 42mm DIN openings, double bail cap is easy to open. 
• Built-in tamper-evident tear out diaphragm. Flush mounting for stacking

Cap - HDPE

Body - LDPE

B420 A
Description

• Shipping cap for 42mm DIN opening

Note: All models incorporate a chemically resistant polypropylene and/or polyethylene material unless otherwise indicated.

Closures for 57mm Openings

B60 CR 2N CR1
Description

• For DIN opening
• Screw fittings with conical base shoulder for large containers.
• Child-resistant double push tab.
• Built-in tamper-evident pullout diaphragm

Cap - HDPE

Body - LDPE

B60 A
Description

• For DIN opening 
• Screw fittings with conical base shoulder for large containers.

Cap - HDPE

Body - LDPE

B60 D A
Description

• Screw fittings for 57mm D opening on large containers. 
• Screw cap provides complete coverage of the closure.
• Available unvented nozzle allows for rapid pouring of highly viscous fluids.

B60 D ST  A
Description

• Screw fittings for 57mm D opening on large containers. 
• Screw cap provides complete coverage of the closure. 
• Additional large diameter rigid pullout spout for ease of pouring.
• Available unvented nozzle allows for rapid pouring of highly viscous fluids.

B650 A
Description

• Shipping cap for 57mm DIN opening

B655 A
Description

• Reusable cap for 57mm DIN opening and two component products

B 601 Z1
Description

• All plastic directional pour spout closure for 57mm DIN opening
• Double-bail cap is easy to open
• Built-in tamper-evident tear-out diaphragm Flush mounting for stacking

Cap - HDPE

Body - LDPE

B601 AG/1 Z1
Description

• Features anti-glug pouring aid  for 57mm DIN opening

B601 D AG Z1
Description

• Screw fittings for 57mm D opening on large containers.
• Features anti-glug pouring aid

B602/1 DSA
Description

• Spout for large containers
• Easy to open & reseal
• Highly chemical resistant
• For 57mm D opening
• Built in Faucet

Closures for 100mm Openings

B100 D A
Description

• Closure for D opening for large containers. 
• Best suited for UN approval. 
• Built-in tamper-evident tear-out diaphragm

Stolz Closures for Plastic Containers

• Specially designed for plastic containers in a broad range of sizes (designed for bottles from 0.5 liter/0.13 gal to 10 liter/2.7 gal), these Stolz closures offer a highly effective plastic-to-plastic seal.

Standard features include:

• Screw caps and gear-oil spouts have a tamper-evident ring.
• Design of flexible spouts prevents surging of fluid when pouring.

Note: Standard colors are red, white and black.

Screw caps and retractable spouts

K362/1 SK PE A
Description

• Screw caps for plastic canisters and bottles of varying sizes.
• Can be resealed with inserted polyethylene liners.
• Suitable for high speed capping.
• Also available with ALU ID (Aluminium induction seal) liner.
• Does fit standard SK 38 neck

K36/1 SK PE A
Description

• Screw caps for plastic canisters and bottles of varying sizes.
• Can be resealed with inserted polyethylene liners.
• Suitable for high speed capping
• Also available with ALU ID (Aluminium induction seal) liner
• Does fit standard SK 38 neck

K36/1 SK PE CR
Description

• Screw caps for plastic canisters and bottles of varying sizes.
• Can be resealed with inserted polyethylene liners. 
• Child resistant feature.
• Suitable for high speed capping
• Does fit standard SK 38 neck

K368/1 PE 400 Z
Description

• Pull-out spout with tamper-evident feature for the K36/1 and K362/1 PE bottle neck. 
• Retractable and tight reclosable. Alllows for accurate pouring in hard-to-reach filling areas.
• Does fit standard SK 38 neck

K375 SK PE
Description

• Large screw caps with a distinctive look 
• Can be resealed with inserted polyethylene liners
• Also available with ALU ID (Aluminium induction seal) liner

K274 B
Description

• Pour spout for plastic bottles with no tamper-evident feature
• Flexible extension tube

Note: All models incorporate a chemically resistant polypropylene and/or polyethylene material unless otherwise indicated.

Flexible Spouts

K456 R AG Z
Description

• For plastic containers 
• Foldable, low profile pouring spout allows stacking. 
• Includes tamper-evident and anti-glug feature
• Press in closure

K601 D/2 Z1
Description

• For stackable plastic containers
• Low profile foldable pouring spout
• Press in closure
• Includes temper evidence

K500/3 AG A
Description

• For plastic canisters
• Low profile screw cap with integrated foldable pouring spout
• Features a unique seal lock that “locks” the screw cap down on the canister
• Features anti-glug pouring aid
• Includes temper evidence